Size : 90gms, 180gms and 1.8kgs
Color : yellow
HSN Code : 3506
Tax Rate : 18 %
Bondtite PRO is a new generation, high performance, room temperature curing, two-component epoxy adhesive system. It has very high-impact strength as well as shear strength and is used for bonding various similar and dissimilar materials such as metals, ceramics wood, leather, rubber, marble, glass, etc
High bonding strength. All Weather & UV Resistance. 7 times more Impact & vibration resistance than Standard Epoxy Adhesives. 20% more coverage than standard epoxy, leading to reduce application cost. 75 mins. pot life at 250 C (100 gm mass) Holding strength in just 4 hours. More Productivity due to fast setting time.
Size : 90gms, 320gms and 2kgs
HSN Code : 3506
Tax Rate : 18 %
Bondtite Wood Paste is a two-component, wood colored, filled epoxy system specially developed for bonding wood to wood and wood to dissimilar substrates like marble, ceramics, metal, glass, wood, fiber glass,etc. It gives water resistance, with no problem of shrinkage, migration, pull away and can be used to replace rotten & worn-out wood, rebuild furniture, reshape carving, handles and knobs as well as to restore antiques etc. Wood dust can be added to improve consistency, appearance and texture.
Bondtite Wood gives 100% waterproof system. It can be used in various wood applications like: Furniture. For water resistance bonding Can be used for filling gaps and holes
Bondtite Wood gives 100% waterproof system. It can be used in various wood applications like: Furniture. For water resistance bonding Can be used for filling gaps and holes
Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by emery cloth. Pre-fit parts to be joined. Squeeze equal volume of material from both part-A & part-B. Mix resin and hardener for one minute thoroughly and then apply as per requirement. It will be fully cured in 24 hours.
Does not bond to polyethylene or polypropylene plastics Applications requiring short-term heat exposure of greater than 150°C Continuously wet areas or water immersion Potable water systems Do not use on areas that will come in contact with food related items
Products should be stored in a dry place in their original, properly closed containers at temperatures between 2-40°C. Partially emptied containers should be closed immediately.
Size : 3 gm, 6 gm, 13 gm, 36 gm, 90 gm, 180 gm, 270 gm, 500 gm set, 1 Kg set & 2 kg set
Color : clear
HSN Code : 3506
Tax Rate : 18 %
Bondtite Fast & Clear is a “5 min” high strength, two-component, transparent epoxy adhesive system. It can be used as an adhesive for a wide range of materials or as a versatile filler for gap bonding, surface repairs and even to bond various substrates like metal, ceramic, wood, chrome, concrete, marble, glass, fiberglass, tiles etc. The curing time for Bondtite Fast & Clear is unaffected by temperature so even at lower temperatures, the pot life will be 5 minutes.
Bondtite Fast & Clear is a 5 min epoxy, so it can be used at those places where instant strength is required. It remains unaffected to mild alkalis, acids, etc. It is a non-toxic, electrically insulating adhesive which does not shrink and is resistant to water and most common solvents. It can be tinted with earth pigments, cement or sand for color matching and can be sanded and drilled.
Clear & transparent bond High strenght Bond multiple substates Solvent free
Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth. Wash glass and ceramic surfaces with soap and water then rinse and let dry. Pre-fit parts to be joined. Squeeze equal volumes of the material from both part-A & part-B. Mix part-A & part-B for one minute thoroughly and then apply as per requirement. Clamp it for 30 minutes. Full Strength will be achieved in 4 hours
Does not bond to polyethylene or polypropylene plastics Applications requiring short-term heat exposure of greater than 150°C Continuously wet areas or water immersion Portable water systems Do not use on areas that will come in contact with food related items
Product should be stored in a dry place in their original, properly closed container.
© 2022 Tapesworld. All Rights Reserved
Design by TechnoTym